Home | Parts | Pictures |Registration | How Stuff Works | Ehow | Youtube |
If not already done ground yourself. Grounding bracelets are a cheap and easy ways to ground yourself so you don't harm any components during assembly or disassembly.
|
Unplug all cables from the outside of the computer. |
Carefully lift the cards out. |
Disconnect the Powersupply from the Motherboard by unplugging the connector from the motherboard. |
Unscrew the Powersupply from the back of the case and unplug it from all the hardware. |
Unplug the hard drive from the motherboard. |
Disconnect any hardware cords from the motherboard and pull it out. |
Unscrew the motherboard from the case and carefully lift out the motherboard. |
Detach the drives from both sides of the computer. |
The computer case should be empty.
|
You can now detach the CPU from the Motherboard by lifting and pulling the CPU fan out and opening the CPU bar that holds the chip in place.
|
You can also remove the RAM by pulling the tabs open on the side of the RAM slot holders and pulling the RAM straight up.
|
Undo any locking mechanism and unscrew any screws if applicable, disconnect any cords that may be plugged into the card so it hangs freely.
|
Firmly grab the card at either end and pull straight out from the slot.
|
The computer should be completely disassembled. |
If you are upgrading your computer at this point you should be able to do these steps backwards but with your new parts. |